| 1. | Concept of Quality Control depends on |
| A. | Quality Control |
| B. | Quality Assurance |
| C. | Quality Management |
| D. | All the above |
| Answer» D. All the above | |
| 2. | __________denotes the Closeness of a measurement to its true value. |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» A. Accuracy | |
| 3. | __________of a measurement denotes its closeness to another measurement of the same quality. |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» B. Precision | |
| 4. | The process of comparing any dimension with its true value is known as ________ |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» C. Calibration | |
| 5. | Which of the following activities are not included in quality assurance? |
| A. | Reliability |
| B. | Ductility |
| C. | Durability |
| D. | Safety |
| Answer» B. Ductility | |
| 6. | Which one of the following is not a guru of TQM? |
| A. | Stewart |
| B. | Deming |
| C. | Newton |
| D. | Juran |
| Answer» C. Newton | |
| 7. | To achieve desirable product quality, Taguchi recommends which process? |
| A. | System design |
| B. | Parameter design |
| C. | Tolerance design |
| D. | All the above |
| Answer» D. All the above | |
| 8. | For fineness of cement test weight of cement retained should not be more than______ |
| A. | 15 % OPC & 10%RHC |
| B. | 10 % OPC & 5%RHC |
| C. | 5 % OPC & 10%RHC |
| D. | 10 % OPC & 15%RHC |
| Answer» B. 10 % OPC & 5%RHC | |
| 9. | What is the initial setting time & final setting time of cement? |
| A. | 30 minutes & 600 minutes |
| B. | 45 minutes & 600 minutes |
| C. | 30 minutes & 450 minutes |
| D. | 60 minutes & 300 minutes |
| Answer» A. 30 minutes & 600 minutes | |
| 10. | Which of the following cement does not have field test? |
| A. | There should not be any visible lumps |
| B. | The colour of the cement should be greenish grey |
| C. | Final setting time of cement is 600 minutes |
| D. | When hand is inserted in cement bag it should give cool feeling. |
| Answer» C. Final setting time of cement is 600 minutes | |
| 11. | The nominal size of brick shall be ________ |
| A. | 19 x 9 x 9 cm |
| B. | 20 x 10 x 10 cm |
| C. | 19 x 9 x 4 cm |
| D. | 20 x 10 x 4 cm |
| Answer» B. 20 x 10 x 10 cm | |
| 12. | As per I.S size of standard brick should be _______ |
| A. | 19 x 9 x 9 cm |
| B. | 20 x 10 x 10 cm |
| C. | 19 x 9 x 4 cm |
| D. | 20 x 10 x 4 cm |
| Answer» A. 19 x 9 x 9 cm | |
| 13. | First class bricks should not absorb more than ____% water |
| A. | 15.00% |
| B. | 20.00% |
| C. | 25.00% |
| D. | 18.00% |
| Answer» B. 20.00% | |
| 14. | For plastering proportion of mortar cement: sand shall be __________ |
| A. | 1:5 to 1:6 |
| B. | 1:3 to 1:4 |
| C. | 1:2 to 1:3 |
| D. | 1:1 to 1:2 |
| Answer» B. 1:3 to 1:4 | |
| 15. | For plastering new surfaces, all masonry joints should be raked to a depth of about ____ |
| A. | 14 mm |
| B. | 16 mm |
| C. | 12 mm |
| D. | 15 mm |
| Answer» C. 12 mm | |
| 16. | Which of following does not represented quality? |
| A. | Strength |
| B. | Durability |
| C. | Test results |
| D. | All of the above |
| Answer» C. Test results | |
| 17. | When structure have a good quality it is ___ |
| A. | Architecture planning proper |
| B. | Adequate testing |
| C. | Workmanship should excellent |
| D. | All of the above |
| Answer» D. All of the above | |
| 18. | Which of the following steps Juran gives for Quality Control. |
| A. | Evaluate actual operating performance |
| B. | Compare actual performance to goals |
| C. | Act on the difference |
| D. | All of the above |
| Answer» D. All of the above | |
| 19. | In which of the following includes are in civil engineering works for quality control. |
| A. | Testing of materials |
| B. | Inspection of finished work |
| C. | Evaluation of construction method |
| D. | All of the above |
| Answer» D. All of the above | |
| 20. | In which of the following factor does not affecting for quality control. |
| A. | Skill of workers |
| B. | does not Supervision standards |
| C. | Quality control plan |
| D. | None of the above |
| Answer» B. does not Supervision standards | |
| 21. | Which of the following benefit is not for quality control. |
| A. | More inspection is required |
| B. | Increased repair cost |
| C. | Both of A and B |
| D. | None of the above |
| Answer» C. Both of A and B | |
| 22. | Which of the following activities are given quality assurance. |
| A. | Safety |
| B. | Durability |
| C. | Reliability |
| D. | All of the above |
| Answer» D. All of the above | |
| 23. | Quality characteristics which are related to only conforming or non-conforming products, are called___ |
| A. | Attributes |
| B. | Variables |
| C. | Continuous characteristics |
| D. | None of the above |
| Answer» A. Attributes | |
| 24. | Quality characteristics which are related to only dimensions or physical parameters, are called___ |
| A. | Attributes |
| B. | Variables |
| C. | Continuous characteristics |
| D. | None of the above |
| Answer» B. Variables | |
| 25. | When record show only the number of, called ___ |
| A. | Attributes |
| B. | Variables |
| C. | Both A and B |
| D. | None of the above |
| Answer» A. Attributes | |
| 26. | Sustainable building means that |
| A. | Green building |
| B. | Environmental building |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 27. | Which of the following elements should be used optimum to make a green building? |
| A. | Agni |
| B. | Jal |
| C. | Prithvi |
| D. | All of the above |
| Answer» D. All of the above | |
| 28. | Which of the following is not the purpose of a green building? |
| A. | To reduce use of water |
| B. | To minimize damage of the environment |
| C. | Re-use of waste materials |
| D. | None of the above |
| Answer» D. None of the above | |
| 29. | Which of the following is not an economic benefit for a green building? |
| A. | 20 – 30 % energy used |
| B. | 20 – 30 % less water used |
| C. | Enhance asset value |
| D. | None of the above |
| Answer» D. None of the above | |
| 30. | Which of the following is not an environment benefit for a green building? |
| A. | To reduce use of water |
| B. | Reduce solid waste |
| C. | Decrease air quality |
| D. | None of the above |
| Answer» C. Decrease air quality | |
| 31. | Which of the following is a disadvantage of green building? |
| A. | Increases 15-20% cost as compared to normal building |
| B. | Modern techniques are required |
| C. | Experts technicians are required |
| D. | All of the above |
| Answer» D. All of the above | |
| 32. | Which of the following is not a green building component? |
| A. | Water efficiency |
| B. | Design efficiency |
| C. | Material efficiency |
| D. | None of the above |
| Answer» D. None of the above | |
| 33. | Which of the following benefit is for green building material? |
| A. | Lower cost |
| B. | Reduced maintenance cost |
| C. | Greater design flexibility |
| D. | All of the above |
| Answer» D. All of the above | |
| 34. | Which of the following green rating systems are currently working in India? |
| A. | LEED |
| B. | GRIHA |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 35. | What are the three pillars of TQM? |
| A. | Vision , Team work , Communication |
| B. | Foundation , Pillars , The top |
| C. | Total , Quality , Management |
| D. | Understanding , Improvement , Assurance |
| Answer» D. Understanding , Improvement , Assurance | |
| 36. | Zaire proposed “building blocks of TQM”? |
| A. | True |
| B. | False |
| C. | none |
| D. | all |
| Answer» A. True | |
| 37. | Zaire proposed “Building blocks of TQM” in which year ? |
| A. | 1990 |
| B. | 1991 |
| C. | 1992 |
| D. | 1993 |
| Answer» B. 1991 | |
| 38. | Proposed “The house of TQM models” in which year? |
| A. | 1990 |
| B. | 1991 |
| C. | 1992 |
| D. | 1993 |
| Answer» D. 1993 | |
| 39. | Foundation, Pillars & the top three proposed in which TQM model? |
| A. | Building blocks of TQM |
| B. | The house of TQM |
| C. | Driving forces of TQM |
| D. | Organization Structure of TQM |
| Answer» A. Building blocks of TQM | |
| 40. | Which of the following is not included in the driving force of TQM? |
| A. | Survival |
| B. | Export Drive |
| C. | Import |
| D. | Profitability |
| Answer» C. Import | |
| 41. | Give full form of P.D.C.A cycle |
| A. | Planning , Doing , Checking , Acting |
| B. | Plan , Do , Check , Act |
| C. | Plan, Does , Check , Act |
| D. | Plan , Do , Checks, Acts |
| Answer» B. Plan , Do , Check , Act | |
| 42. | Who’s suggested PDCA cycle? |
| A. | Shewhart |
| B. | Deming |
| C. | Newton |
| D. | Juran |
| Answer» B. Deming | |
| 43. | In machine mixing gap between drum & blades shall not be more than ____ |
| A. | 20 mm |
| B. | 30 mm |
| C. | 15 mm |
| D. | 25 mm |
| Answer» D. 25 mm | |
| 44. | Batching error means inaccuracy in the quantity of |
| A. | Aggregates |
| B. | Cement |
| C. | Water |
| D. | All the above |
| Answer» D. All the above | |
| 45. | The Curing periods depends upon |
| A. | Type of cement |
| B. | Weather Conditions |
| C. | Methods of curing |
| D. | All of the above |
| Answer» D. All of the above | |
| 46. | While compacting the concrete by a mechanical vibrator , the slump should not exceed |
| A. | 2.5 cm |
| B. | 7.5 cm |
| C. | 5.0 cm |
| D. | 10 cm |
| Answer» C. 5.0 cm | |
| 47. | Improper curing results in |
| A. | Shrinkage cracks |
| B. | Loss of strength |
| C. | Increase in permeability |
| D. | All of the above |
| Answer» D. All of the above | |
| 48. | When removal of form work for walls , columns and vertical faces of all structural members |
| A. | 2 to 3 days |
| B. | 16 to 24 hours |
| C. | 8 to 12 hours |
| D. | 7 days |
| Answer» B. 16 to 24 hours | |
| 49. | Removal of props under slabs spanning upto 4.5 m |
| A. | 3 days |
| B. | 7 days |
| C. | 14 days |
| D. | 21 days |
| Answer» B. 7 days | |
| 50. | Which is a good formwork? |
| A. | Easy Removal |
| B. | Economical |
| C. | Less leakage |
| D. | All of the above |
| Answer» D. All of the above | |
| 51. | For a family of 10-15 members, _____ diameter stoneware pipe is sufficient. |
| A. | 8 cm |
| B. | 10 mm |
| C. | 10 cm |
| D. | 12 cm |
| Answer» C. 10 cm | |
| 52. | In W.C and bathroom the slope of the floor should be towards _____ |
| A. | Gully Trap |
| B. | Nanhi Trap |
| C. | Man hole |
| D. | Waste Pipe |
| Answer» B. Nanhi Trap | |
| 53. | Variables also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» B. Continuous data | |
| 54. | Attributes also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» A. Discrete data | |
| 55. | Full form of SQC is____ |
| A. | Statistical Quantity Control |
| B. | Standard Quality Control |
| C. | Statistical Quality Control |
| D. | Standard Quantity Control |
| Answer» C. Statistical Quality Control | |
| 56. | Which of the following activities are given in SQC techniques. |
| A. | Analyzing data |
| B. | Systematic collection of data |
| C. | Management action |
| D. | All of the above |
| Answer» D. All of the above | |
| 57. | In a group of similar items, any one item is called___ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» B. Unit | |
| 58. | A common source from which all units are obtained is called____ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» A. Universe | |
| 59. | Which of the following benefit is not for SQC. |
| A. | Better quality assurance |
| B. | Not free from sources of variations |
| C. | Reduced inspection cost |
| D. | All of the above |
| Answer» B. Not free from sources of variations | |
| 60. | Which of the following objectives are for statistical quality control. |
| A. | Reduced inspection cost |
| B. | Better quality assurance |
| C. | To take corrective measure |
| D. | All of the above |
| Answer» D. All of the above | |
| 61. | Full form of SPC is ____ |
| A. | Standard Process Control |
| B. | Statistical Process Common |
| C. | Statistical Process Control |
| D. | Standard Process Common |
| Answer» C. Statistical Process Control | |
| 62. | Which of the following objective is not for SPC. |
| A. | Collecting data |
| B. | Controlling of performances |
| C. | Predicting future tendencies |
| D. | None of the above |
| Answer» D. None of the above | |
| 63. | Why we should refer NBC for. |
| A. | For structural design |
| B. | To know acoustics standards |
| C. | For implementation of building bye laws |
| D. | All of the above |
| Answer» D. All of the above | |
| 64. | How many parts are consists in to NBC? |
| A. | 10 |
| B. | 11 |
| C. | 12 |
| D. | 13 |
| Answer» A. 10 | |
| 65. | Which of the following IS code use for masonry construction? |
| A. | IS : 456 Masonry Construction |
| B. | IS : 1905 Masonry Construction |
| C. | IS : 800 Masonry Construction |
| D. | IS : 875 Masonry Construction |
| Answer» B. IS : 1905 Masonry Construction | |
| 66. | Which of the following standards was focused on quality of product instead of quality of process? |
| A. | British standard |
| B. | Military standard |
| C. | Petroleum standard |
| D. | All of the above |
| Answer» D. All of the above | |
| 67. | What is the full form ISO is? |
| A. | International Standard Organization |
| B. | Indian Standards Organization |
| C. | International Supply Organization |
| D. | Indian Supply Organization |
| Answer» A. International Standard Organization | |
| 68. | When was issued ISO 9000 series by ISO? |
| A. | March 1986 |
| B. | March 1987 |
| C. | March 1988 |
| D. | March 1989 |
| Answer» B. March 1987 | |
| 69. | Which of the following standard is considered good for business practices? |
| A. | ISO 9000 series |
| B. | IS 14000 series |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 70. | Which of the following ISO 9000 parts has given general guidelines? |
| A. | ISO 9000 and ISO 9001 |
| B. | ISO 9000 and ISO 9002 |
| C. | ISO 9000 and ISO 9003 |
| D. | ISO 9000 and ISO 9004 |
| Answer» D. ISO 9000 and ISO 9004 | |
| 71. | Which of the following ISO 9000 parts has applicable to only design control? |
| A. | ISO 9001 |
| B. | ISO 9002 |
| C. | ISO 9003 |
| D. | ISO 9004 |
| Answer» A. ISO 9001 | |
| 72. | How many elements are covered in ISO 9001 quality system? |
| A. | 19 |
| B. | 13 |
| C. | 20 |
| D. | 15 |
| Answer» C. 20 | |
| 73. | LEED means___ |
| A. | Leadership in Energy and Environmental Document |
| B. | Leadership in Energy and Environmental Design |
| C. | Leadership in Energy and Efficiency Document |
| D. | Leadership in Energy and Efficiency Design |
| Answer» B. Leadership in Energy and Environmental Design | |
| 74. | LEED gives rating in form___ |
| A. | Platinum |
| B. | Gold |
| C. | Silver |
| D. | All of the above |
| Answer» D. All of the above | |
| 75. | GRIHA means that___ |
| A. | Green Rating for Integrated Habital Assessment |
| B. | Green Rating for Information Habital Assessment |
| C. | Green Rating for Indian Habital Assessment |
| D. | Green Rating for International Habital Assessment |
| Answer» A. Green Rating for Integrated Habital Assessment | |
| 76. | When GRIHA was launched in India? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» B. 2008 | |
| 77. | GRIHA has been prepared by ___ |
| A. | USGBC |
| B. | TERI |
| C. | LEED |
| D. | None of the above |
| Answer» B. TERI | |
| 78. | When LEED was launched in india? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» A. 2001 | |
| 79. | Full name of TERI is___ |
| A. | The Energy and Resources Institute |
| B. | The Energy and Rating Institute |
| C. | The Energy and Resources India |
| D. | The Environmental and Resources Institute |
| Answer» A. The Energy and Resources Institute | |
| 80. | Full form of IGBC is that___ |
| A. | International Green Building Council |
| B. | International Green Building Control |
| C. | Indian Green Building Council |
| D. | Indian Green Building Control |
| Answer» C. Indian Green Building Council | |
| 81. | What rating did the Government of India make mandatory for government buildings in 2010? |
| A. | GRIHA – 2 Star |
| B. | GRIHA – 3 Star |
| C. | Gold |
| D. | Platinum |
| Answer» B. GRIHA – 3 Star | |
| 82. | ADARSH means___ |
| A. | Association for Design and Research of Sustainable Habitas |
| B. | Association for Development and Rating of Sustainable Habitas |
| C. | Association for Development and Research of Sustainable Habitas |
| D. | Association for Design and Rating of Sustainable Habitas |
| Answer» C. Association for Development and Research of Sustainable Habitas | |
| 83. | __________of a measurement denotes its closeness to another measurement of the same quality |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» B. Precision | |
| 84. | The capacity of any instrument to take minimum measurement is called its _______ |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» D. Least count | |
| 85. | Which one is not sources of errors? |
| A. | Instrumental Errors |
| B. | Personal Errors |
| C. | Calculated Errors |
| D. | Natural Errors |
| Answer» C. Calculated Errors | |
| 86. | 12.3056 number has how many significant figures? |
| A. | 2 |
| B. | 6 |
| C. | 3 |
| D. | 4 |
| Answer» B. 6 | |
| 87. | Area=(h1+h2+h3+….hn ) d calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson’s rule |
| Answer» A. Mid ordinate rule | |
| 88. | Area= (h0 +h1 +h2 +h3 +….hn) (n+1) × nd Calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson’s rule |
| Answer» B. Average ordinate rule | |
| 89. | Which methods are generally adopted for computation of volumes |
| A. | From cross-sections |
| B. | From spot levels |
| C. | From contours |
| D. | All the above |
| Answer» D. All the above | |
| 90. | The minimum width of the main entrance at residential door shall be _____ |
| A. | 800 mm |
| B. | 900 mm |
| C. | 1000 mm |
| D. | 1200 mm |
| Answer» C. 1000 mm | |
| 91. | The door / window frame should have ______ horn at the upper side. |
| A. | 10 cm |
| B. | 12 cm |
| C. | 15 cm |
| D. | 20 cm |
| Answer» C. 15 cm | |
| 92. | In school, hospitals, offices the wall openings shall be atleast _____ of the floor area. |
| A. | 10% |
| B. | 15% |
| C. | 20% |
| D. | 25% |
| Answer» C. 20% | |
| 93. | A brick dropped flat on the hard ground from a height of ____ should not break. |
| A. | 0.8 m |
| B. | 1.1 m |
| C. | 1.5 m |
| D. | 1.2 m |
| Answer» D. 1.2 m | |
| 94. | Instrument used for setting out right angles are |
| A. | Cross staff |
| B. | Optical square |
| C. | Prism square |
| D. | All the above |
| Answer» D. All the above | |
| 95. | Removal of props under beams and arches spanning upto 6 m |
| A. | 7 days |
| B. | 14 days |
| C. | 21 days |
| D. | 28 days |
| Answer» B. 14 days | |
| 96. | Full form of QCIP |
| A. | Quantity Control Inspection Program |
| B. | Quality Control Inspection Programing |
| C. | Quality Control Ideal Program |
| D. | Quality Control Inspection Program |
| Answer» D. Quality Control Inspection Program | |
| 97. | Storage of cement bags should be kept______ away from walls. |
| A. | 20 cm |
| B. | 30 cm |
| C. | 40 cm |
| D. | 10 cm |
| Answer» B. 30 cm | |
| 98. | Bricks absorbing more than _____ water should be rejected |
| A. | 20% |
| B. | 22% |
| C. | 25% |
| D. | 15% |
| Answer» C. 25% | |
| 99. | Which of the following points has not be covered in ISO 9003 ? |
| A. | Contract review |
| B. | Inspection and testing |
| C. | Quality records |
| D. | None of the above |
| Answer» D. None of the above | |
| 100. | Which of the following sequences are for the installation of ISO 9000 quality system? |
| A. | Preparatory- Registration and certification -Implementation |
| B. | Preparatory-Implementation-Registration and certification |
| C. | Registration and certification -Preparatory- Implementation |
| D. | Registration and certification –Implementation- Preparatory |
| Answer» B. Preparatory-Implementation-Registration and certification | |
| 101. | Which of the following is not quality system document for getting the ISO 9000 certificate? |
| A. | Quality manual & Procedures |
| B. | Work instruction |
| C. | Quality records |
| D. | None of the above |
| Answer» D. None of the above | |
| 102. | Indian equivalence of ISO 9000 is ___ |
| A. | IS 14000 |
| B. | ISO 14000 |
| C. | IS 14002 |
| D. | IS 14003 |
| Answer» A. IS 14000 | |
| 103. | Which of the following company may applied for ISO 9001 certificate? |
| A. | Civil Structural |
| B. | Fertilizers |
| C. | Building material |
| D. | All of the above |
| Answer» A. Civil Structural | |
| 104. | Which of the following ISO standard series are used for environmental management? |
| A. | IS 14000 |
| B. | ISO 14000 |
| C. | IS 9000 |
| D. | ISO 9000 |
| Answer» B. ISO 14000 | |
| 105. | Which of the following categories are included into ISO 14000 standards? |
| A. | Environmental Management System |
| B. | Environmental Auditing |
| C. | Environmental Performance Evaluation |
| D. | All of the above |
| Answer» D. All of the above | |
| 106. | What is the meaning of EMS? |
| A. | Environmental Management Systems |
| B. | Environmental Monitoring Systems |
| C. | Environmental Management Standards |
| D. | Environmental Monitoring Standards |
| Answer» A. Environmental Management Systems | |
| 107. | Which of the following standard is used for Environmental Management Systems |
| A. | ISO 14001 |
| B. | ISO 14004 |
| C. | Both A and B |
| D. | None of the Above |
| Answer» C. Both A and B | |
| 108. | The structure of ISO 14001 is based on the ____ |
| A. | Juran cycle |
| B. | Deming Cycle |
| C. | Pareto cycle |
| D. | None of the Above |
| Answer» B. Deming Cycle | |
| 109. | Deming cycle is that ____ |
| A. | Plan – Do – Check – Act |
| B. | Plan – Check – Act – Do |
| C. | Plan – Do – Act – Check |
| D. | Plan – Act – Check – Do |
| Answer» A. Plan – Do – Check – Act | |
| 110. | Which of the following ISO 14001 aims are? |
| A. | Waste Prevention |
| B. | Energy Conservation |
| C. | Pollution Control |
| D. | All of the Above |
| Answer» D. All of the Above | |
| 111. | Which of the following ISO 14000 benefits are? |
| A. | Improve cost control |
| B. | Limit liability |
| C. | Protect human health |
| D. | All of the Above |
| Answer» D. All of the Above | |
| 112. | Which rating star is given by GRIHA for points between 71 – 80? |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» C. 3 | |
| 113. | How many set of criteria formulated by GRIHA for rating the building? |
| A. | 31 |
| B. | 32 |
| C. | 33 |
| D. | 34 |
| Answer» D. 34 | |
| 114. | LCA means that___ |
| A. | Life Cycle Assessment |
| B. | Life Council Assessment |
| C. | Life Cycle Association |
| D. | Local Cycle Assessment |
| Answer» A. Life Cycle Assessment | |
| 115. | LCA associated with a___ |
| A. | Product |
| B. | Process |
| C. | Service |
| D. | All of the above |
| Answer» D. All of the above | |
| 116. | Which of the following assessments is made by LCA throughout the life of a building? |
| A. | Use of building |
| B. | Transportation of construction material |
| C. | Disposal of surplus waste material |
| D. | All of the above |
| Answer» D. All of the above | |
| 117. | Which of the following phases is not a LCA process? |
| A. | Life cycle inventory |
| B. | Life cycle impact assessment |
| C. | Life cycle interpretation |
| D. | None of the above |
| Answer» D. None of the above | |
| 118. | Which of the following are not a benefits for LCA? |
| A. | Does not improvement in the quality of environment |
| B. | To know about Eco-friendly materials |
| C. | Promotion to recycle and reuse of waste materials |
| D. | None of the above |
| Answer» A. Does not improvement in the quality of environment | |
| 119. | Which of the following are not a measure for a green building? |
| A. | Use B-rated elements that save energy |
| B. | Install solar panels for lighting or heating water |
| C. | Install water meters in a building |
| D. | None of the above |
| Answer» D. None of the above | |
| 120. | Which of the following techniques are for statistical process control. |
| A. | Check list |
| B. | Scatter diagram |
| C. | Pareto diagram |
| D. | All of the above |
| Answer» D. All of the above | |
| 121. | Which of the following diagram is represent relationship between causes & effect. |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Histogram |
| D. | Pareto diagram |
| Answer» A. C & E diagram | |
| 122. | Which of the following type of chart is to systematic way of recording data? |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Check list |
| D. | Pareto diagram |
| Answer» C. Check list | |
| 123. | Which of the following type of diagram is helps to analyzing the relationship between two variables? |
| A. | C & E diagram |
| B. | Scatter diagram |
| C. | Check list |
| D. | Pareto diagram |
| Answer» B. Scatter diagram | |
| 124. | Pareto diagram is given by ___ |
| A. | Dr. Ishikawa |
| B. | Dr. Joseph Juran |
| C. | Vilfredo Pareto |
| D. | Dr. Mark Crossby |
| Answer» C. Vilfredo Pareto | |
| 125. | C & E diagram is given by___. |
| A. | Dr. Ishikawa |
| B. | Dr. Joseph Juran |
| C. | Vilfredo Pareto |
| D. | Dr. Mark Crossby |
| Answer» A. Dr. Ishikawa | |
| 126. | Which of the following methods of statistical quality control? |
| A. | Frequency distribution |
| B. | Control chart |
| C. | Acceptance sampling |
| D. | All of the above |
| Answer» D. All of the above | |
| 127. | In frequency distribution method is find only ____ |
| A. | Variations |
| B. | Frequency |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 128. | In which of the following characteristics are for frequency distribution? |
| A. | Central tendency |
| B. | Spread |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 129. | Which of the following measures are not included in central tendency? |
| A. | Range & Standard deviation |
| B. | Mean, Median & Mode |
| C. | Both A and B |
| D. | None of the above |
| Answer» A. Range & Standard deviation | |
| 130. | Which of the following measures are included spread? |
| A. | Range |
| B. | Standard deviation |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 131. | Largest frequency of the variable is called to___ |
| A. | Mean |
| B. | Mode |
| C. | Median |
| D. | None of the above |
| Answer» B. Mode | |
| 132. | Find out mode for 11, 12, 14, 14, 17, 18 ? |
| A. | 11 |
| B. | 18 |
| C. | 14 |
| D. | 14.5 |
| Answer» C. 14 | |
| 133. | What is the following value of median for 11, 12, 14, 15, 17, 18 ? |
| A. | 11 |
| B. | 18 |
| C. | 14 |
| D. | 14.5 |
| Answer» D. 14.5 | |
| 134. | The observations are given that 11, 12, 14, 15, 17, 18 so what is the value of variance for observation 12? |
| A. | 0 |
| B. | -2.5 |
| C. | 2.5 |
| D. | None of the above |
| Answer» B. -2.5 | |
| 135. | What is the following value of range for 11, 12, 14, 15, 17, 18? |
| A. | 7 |
| B. | -7 |
| C. | 14 |
| D. | 14.5 |
| Answer» A. 7 | |
| 136. | What is say about friction between sample sizes to total item in a lot? |
| A. | Sampling fraction |
| B. | Standard deviation |
| C. | Variance |
| D. | None of the above |
| Answer» A. Sampling fraction | |
| 137. | One or more items taken from a quantity is called___ |
| A. | Sample |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» A. Sample | |
| 138. | The number of items in a sample is called___ |
| A. | Sample |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» C. Sample size | |
| 139. | Each element of a sample is called___ |
| A. | Item |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» A. Item | |
| 140. | A collection of many items is called ____ |
| A. | Item |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» B. Lot | |
| 141. | Total number of items in a lot is called ____ |
| A. | Item |
| B. | Lot |
| C. | Sample size |
| D. | Lot size |
| Answer» D. Lot size | |
| 142. | The method of preparation of a sample is called___ |
| A. | Sampling |
| B. | Inspection |
| C. | Testing |
| D. | None of the above |
| Answer» A. Sampling | |
| 143. | Which of the following elements are included for inspection? |
| A. | Measurement |
| B. | Examination |
| C. | Comparison |
| D. | All of the above |
| Answer» D. All of the above | |
| 144. | What is the sampling fraction is that for lot of bricks 500, a sample of 10 bricks is taken. |
| A. | 1/500 |
| B. | 1/50 |
| C. | 1/5 |
| D. | 1 |
| Answer» B. 1/50 | |
| 145. | Which of the following is not a sampling techniques? |
| A. | Three stage sampling |
| B. | Two stage sampling |
| C. | Simple random sampling |
| D. | None of the above |
| Answer» A. Three stage sampling | |
| 146. | Which of the following sampling techniques is useful when lot size is large and simple random sampling is not possible? |
| A. | Stratified sampling |
| B. | Proportional sampling |
| C. | Both A & B |
| D. | None of the above |
| Answer» C. Both A & B | |
Tags
Question and answers in Construction Quality Control and Monitoring,Construction Quality Control and Monitoring multiple choice questions and answers,Construction Quality Control and Monitoring Important MCQs,Solved MCQs for Construction Quality Control and Monitoring,Construction Quality Control and Monitoring MCQs with answers PDF download
