Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
The header length of an IPv6 datagram is _____.
The header length of an IPv6 datagram is 40 bytes.
The header length of an IPv6 datagram is 40 bytes.
See lessThe controlling parameter in MOSFET is
The controlling parameter in a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) is the gate voltage (V_GS). This voltage controls the conductivity of the channel between the source and drain terminals, allowing the MOSFET to switch on or off.
The controlling parameter in a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) is the gate voltage (V_GS). This voltage controls the conductivity of the channel between the source and drain terminals, allowing the MOSFET to switch on or off.
See lessWhat should be the flag value to indicate the last fragment?
The flag value to indicate the last fragment in the IPv4 header is the "More Fragments" (MF) flag. When this flag is set to 0, it indicates that the fragment is the last one in the sequence.
The flag value to indicate the last fragment in the IPv4 header is the “More Fragments” (MF) flag. When this flag is set to 0, it indicates that the fragment is the last one in the sequence.
See lessThe ______ method when used in the method field, leaves entity body empty.
The DELETE method when used in the method field, leaves the entity body empty.
The DELETE method when used in the method field, leaves the entity body empty.
See lessThe values GET, POST, HEAD etc are specified in ____ of HTTP message
The values GET, POST, HEAD, etc., are specified in the request line of an HTTP message.
The values GET, POST, HEAD, etc., are specified in the request line of an HTTP message.
See lessThe MOSFET combines the areas of _______ & _________
The MOSFET combines the areas of electronics & semiconductor technology.
The MOSFET combines the areas of electronics & semiconductor technology.
See lessA 1mv of i/p gives an output of 1V, the voltage gain as such would be
The voltage gain can be calculated using the formula:[text{Voltage Gain (Av)} = frac{text{Output Voltage (Vout)}}{text{Input Voltage (Vin)}}]In this case:- Input Voltage (Vin) = 1 mV = 0.001 V- Output Voltage (Vout) = 1 VNow, substituting the values into the formula:[Av = frac{1 V}{0.001 V} = 1000]TRead more
The voltage gain can be calculated using the formula:
[
text{Voltage Gain (Av)} = frac{text{Output Voltage (Vout)}}{text{Input Voltage (Vin)}}
]
In this case:
– Input Voltage (Vin) = 1 mV = 0.001 V
– Output Voltage (Vout) = 1 V
Now, substituting the values into the formula:
[
Av = frac{1 V}{0.001 V} = 1000
]
Therefore, the voltage gain is 1000.
See lessFor a power transistor, if the forward current gain α = 0.97, then β = ?
The relationship between the forward current gain (α) and the current gain (β) for a transistor is given by the formula:[β = frac{α}{1 - α}]Substituting the value of α:[β = frac{0.97}{1 - 0.97} = frac{0.97}{0.03} approx 32.33]So, β is approximately 32.33.
The relationship between the forward current gain (α) and the current gain (β) for a transistor is given by the formula:
[
β = frac{α}{1 – α}
]
Substituting the value of α:
[
β = frac{0.97}{1 – 0.97} = frac{0.97}{0.03} approx 32.33
]
So, β is approximately 32.33.
See lessWho built the world’s first electronic calculator using telephone relays, light bulbs and batteries?
The world’s first electronic calculator was built by Arthur C. Clarke and his team in 1945, known as the "Beacon."
The world’s first electronic calculator was built by Arthur C. Clarke and his team in 1945, known as the “Beacon.”
See lessNetwork congestion occurs
Network congestion occurs when the demand for network resources exceeds the available capacity, leading to a slowdown in data transmission. This situation can arise due to various factors such as high traffic volume, limited bandwidth, or insufficient network infrastructure. As a result, packets mayRead more
Network congestion occurs when the demand for network resources exceeds the available capacity, leading to a slowdown in data transmission. This situation can arise due to various factors such as high traffic volume, limited bandwidth, or insufficient network infrastructure. As a result, packets may be delayed, dropped, or retransmitted, which affects the overall performance and reliability of the network. Network congestion can impact applications, user experience, and the efficiency of communication over the network. Solutions to network congestion may include upgrades to infrastructure, traffic management techniques, and quality of service (QoS) policies.
See less