Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
The percentage of time the system is up and running smoothly is referred as ________.
The percentage of time the system is up and running smoothly is referred to as "Uptime."
The percentage of time the system is up and running smoothly is referred to as “Uptime.”
See lessNovell’s implementation of RIP updates routing tables every _________ seconds
60
60
See lessWhat does the “IPX maximum-paths 2” command accomplish?
The "IPX maximum-paths 2" command is used in the context of networking with the Interior Gateway Routing Protocol (IGRP) for IPX (Internetwork Packet Exchange, a network layer protocol used in Novell NetWare environments). This command configures the maximum number of equal-cost paths that IGRP willRead more
The “IPX maximum-paths 2” command is used in the context of networking with the Interior Gateway Routing Protocol (IGRP) for IPX (Internetwork Packet Exchange, a network layer protocol used in Novell NetWare environments). This command configures the maximum number of equal-cost paths that IGRP will include in the routing table for IPX routes. By setting this value to 2, the router is allowed to keep up to two parallel paths to a destination in the routing table. If there are more than two equal-cost paths available, the router will choose the first two it learns about and ignore the rest. This feature is used for load balancing over multiple links, improving the network’s efficiency by distributing traffic across several paths.
See less0.0.0 router IGRP 109 network 172.68.7.0
The command provided seems to relate to configuring an IGRP (Interior Gateway Routing Protocol) routing instance on a router. IGRP is an outdated and proprietary Cisco routing protocol, succeeded by EIGRP (Enhanced Interior Gateway Routing Protocol).To interpret and elaborate on the command: 0.0.0 rRead more
The command provided seems to relate to configuring an IGRP (Interior Gateway Routing Protocol) routing instance on a router. IGRP is an outdated and proprietary Cisco routing protocol, succeeded by EIGRP (Enhanced Interior Gateway Routing Protocol).
To interpret and elaborate on the command:
0.0.0 router IGRP 109 network 172.68.7.0
This command appears to attempt to configure IGRP for your network but seems to be formatted incorrectly or is incomplete for actual CLI (Command Line Interface) input. A more accurate set of commands for configuring IGRP (keeping in mind IGRP is outdated and not recommended for current use) on a Cisco router might look something like this:
router igrp 109
network 172.68.7.0
Here’s the breakdown:
– router igrp 109: This command moves the Cisco router into router configuration mode and specifies the use of IGRP with an autonomous system (AS) number of 109. The AS number is used to identify the set of routers that share the same IGRP routing information.
– network 172.68.7.0: This command tells the router to advertise the specified network (in this case, 172.68.7.0) to other routers within the IGRP 109 domain. The router will include this network in its IGRP routing updates it sends to other routers in the same IGRP autonomous system.
It
See lessWhich NetWare protocol provides link-state routing?
The NetWare protocol that provides link-state routing is the NetWare Link Services Protocol (NLSP).
The NetWare protocol that provides link-state routing is the NetWare Link Services Protocol (NLSP).
See lessWhich NetWare protocol works on layer 3–network layer—of the OSI model?
The NetWare protocol that works on layer 3—the network layer—of the OSI model is the IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange). IPX is responsible for the network layer functions, essentially routing the data from one network to another.
The NetWare protocol that works on layer 3—the network layer—of the OSI model is the IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange). IPX is responsible for the network layer functions, essentially routing the data from one network to another.
See lessWhich type of Ethernet framing is used for TCP/IP and DEC net?
The type of Ethernet framing used for TCP/IP is Ethernet II framing. Ethernet II is the Ethernet frame format that is widely used in TCP/IP networks for the encapsulation of IP packets.For DECnet, depending on the specific phase or version of DECnet, Ethernet II framing can also be used. However, orRead more
The type of Ethernet framing used for TCP/IP is Ethernet II framing. Ethernet II is the Ethernet frame format that is widely used in TCP/IP networks for the encapsulation of IP packets.
For DECnet, depending on the specific phase or version of DECnet, Ethernet II framing can also be used. However, originally, DECnet Phase IV utilized IEEE 802.3 standard with SNAP (SubNetwork Access Protocol) encapsulation for Ethernet framing prior to the wide adoption of Ethernet II framing for various protocols including DECnet over Local Area Networks (LANs).
See less________ refers to an increase in the performance by the addition of more resources along the service layers
Scalability refers to an increase in the performance by the addition of more resources along the service layers.
Scalability refers to an increase in the performance by the addition of more resources along the service layers.
See lessThe Data-Intensive Scalable Computing(DISC) utilizes a ________ data-center clusters to gather and maintain data.
The Data-Intensive Scalable Computing (DISC) utilizes distributed data-center clusters to gather and maintain data.
The Data-Intensive Scalable Computing (DISC) utilizes distributed data-center clusters to gather and maintain data.
See lesshe network address of 172.16.0.0/19 provides how many subnets and hosts?
The given network address is 172.16.0.0 with a subnet mask of /19. This means that the first 19 bits of the IP address are dedicated to the network portion, while the remaining bits are for host addresses within that network.To understand how many subnets and hosts this provides, we need to break doRead more
The given network address is 172.16.0.0 with a subnet mask of /19. This means that the first 19 bits of the IP address are dedicated to the network portion, while the remaining bits are for host addresses within that network.
To understand how many subnets and hosts this provides, we need to break down the information:
1. CIDR Notation (/19): Classless Inter-Domain Routing (CIDR) notation of /19 means that 19 bits are used for the network part of the address. Since this is an IPv4 address, there are a total of 32 bits in the address. This leaves us with 32 – 19 = 13 bits for host addresses.
2. Calculating Subnets: Since the original classful nature of this address would be a Class B (given the starting range of 172.16.0.0), and Class B addresses typically come with a default subnet mask of /16, using a /19 subnet mask means we are subnetting further into smaller networks. The difference between the original class subnet mask (/16) and the given subnet mask (/19) is 3 bits (19-16 = 3). These 3 bits allow for 2^3 = 8 subnets. However, this calculation assumes we’re strictly adhering to subnetting within what would originally be considered a single network in classical classful networking. In modern classless networking, this isn
See less