Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
Fiber optics posses following properties __________
Fiber optics possess the following properties: 1. Total Internal Reflection: This allows light to be transmitted through the fiber with minimal loss. 2. Low Attenuation: Fiber optics can transmit signals over long distances with very little signal loss. 3. Wide Bandwidth: They can carry a large amouRead more
Fiber optics possess the following properties:
1. Total Internal Reflection: This allows light to be transmitted through the fiber with minimal loss.
2. Low Attenuation: Fiber optics can transmit signals over long distances with very little signal loss.
3. Wide Bandwidth: They can carry a large amount of data at high speeds compared to traditional copper wires.
4. Immunity to Electromagnetic Interference: Fiber optics are not susceptible to interference from electrical noise.
5. Lightweight and Flexible: Fiber optic cables are thinner and lighter than copper cables, making them easier to install and manage.
6. High Security: It is difficult to tap into fiber optic cables without detection, providing a secure method of communication.
These properties make fiber optics a popular choice for telecommunications, internet, and data transmission applications.
See lessICMP is primarily used for __________
ICMP is primarily used for error messages and operational information exchange in network communication.
ICMP is primarily used for error messages and operational information exchange in network communication.
See lessThe architecture of IoT consists of different layers including which of the following? i. Application Layer ii. Sensing Layer iii. Combination Layer iv. Network Layer
The architecture of IoT consists of different layers including the following:i. Application Layerii. Sensing Layeriv. Network LayerThe "Combination Layer" is not typically recognized as a standard layer in IoT architecture.
The architecture of IoT consists of different layers including the following:
i. Application Layer
ii. Sensing Layer
iv. Network Layer
The “Combination Layer” is not typically recognized as a standard layer in IoT architecture.
See lessData communication system within a building or campus is________
Data communication system within a building or campus is Local Area Network (LAN).
Data communication system within a building or campus is Local Area Network (LAN).
See lessData communication system spanning states, countries, or the whole world is _______
Data communication system spanning states, countries, or the whole world is a WAN (Wide Area Network).
Data communication system spanning states, countries, or the whole world is a WAN (Wide Area Network).
See lessRFID stand for
RFID stands for Radio-Frequency Identification.
RFID stands for Radio-Frequency Identification.
See lessThe percentage of time the system is up and running smoothly is referred as.
The percentage of time the system is up and running smoothly is referred to as "availability."
The percentage of time the system is up and running smoothly is referred to as “availability.”
See lessGeostationary satellites ___________
Geostationary satellites orbit the Earth at a fixed position relative to the Earth's surface, allowing them to remain over the same geographic area. They achieve this by orbiting at a height of approximately 35,786 kilometers (22,236 miles) above the equator at a speed that matches the Earth's rotatRead more
Geostationary satellites orbit the Earth at a fixed position relative to the Earth’s surface, allowing them to remain over the same geographic area. They achieve this by orbiting at a height of approximately 35,786 kilometers (22,236 miles) above the equator at a speed that matches the Earth’s rotation. This enables them to provide consistent communication signals and monitoring over a specific region, making them ideal for applications such as telecommunications and weather observation.
See lessIf an Optical Carrier is represented as OC-n, generally the link speed equals(in Mbps) __________
The link speed in Mbps for an Optical Carrier represented as OC-n is equal to 51.84 × n. Therefore, the formula can be simplified as:- OC-1: 51.84 Mbps- OC-3: 155.52 Mbps- OC-12: 622.08 Mbps- OC-24: 1,244.16 Mbps- OC-48: 2,488.32 Mbps- OC-192: 9,953.28 MbpsSo, generally, the link speed equals (in MbRead more
The link speed in Mbps for an Optical Carrier represented as OC-n is equal to 51.84 × n. Therefore, the formula can be simplified as:
– OC-1: 51.84 Mbps
– OC-3: 155.52 Mbps
– OC-12: 622.08 Mbps
– OC-24: 1,244.16 Mbps
– OC-48: 2,488.32 Mbps
– OC-192: 9,953.28 Mbps
So, generally, the link speed equals (in Mbps) 51.84 × n.
See lessOne of the reasons of widespread of cloud is its ability to provide resource allocation dynamically from a pool of VM resources. State True or False.
True
True
See less