Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
What is the central device in star topology?
The central device in a star topology is usually a network switch or hub.
The central device in a star topology is usually a network switch or hub.
See lessWhat is the max length of the Shielded twisted pair cable?
The maximum length of shielded twisted pair (STP) cable is typically 100 meters (328 feet) for Ethernet networking. This includes the total length of the cable run from the switch to the device, along with any patch cables.
The maximum length of shielded twisted pair (STP) cable is typically 100 meters (328 feet) for Ethernet networking. This includes the total length of the cable run from the switch to the device, along with any patch cables.
See lessA 1mv of i/p gives an output of 1V, the voltage gain as such would be
The voltage gain is calculated by dividing the output voltage by the input voltage. In this case:Voltage gain (A) = Output Voltage / Input Voltage = 1V / 1mVSince 1mV is equal to 0.001V:Voltage gain (A) = 1V / 0.001V = 1000Therefore, the voltage gain is 1000.
The voltage gain is calculated by dividing the output voltage by the input voltage. In this case:
Voltage gain (A) = Output Voltage / Input Voltage = 1V / 1mV
Since 1mV is equal to 0.001V:
Voltage gain (A) = 1V / 0.001V = 1000
Therefore, the voltage gain is 1000.
See lessWith respect to physical media, STP cables stands for _________
Shielded Twisted Pair
Shielded Twisted Pair
See lessPropagation delay depends on __________
Propagation delay depends on the distance the signal must travel and the speed at which the signal propagates through the medium.
Propagation delay depends on the distance the signal must travel and the speed at which the signal propagates through the medium.
See lessA 1mv of i/p gives an output of 1V, the voltage gain as such would be
The voltage gain (Av) can be calculated using the formula:[ Av = frac{V_{out}}{V_{in}} ]In this case, the input voltage (Vin) is 1 mV (which is 0.001 V) and the output voltage (Vout) is 1 V.So the voltage gain would be:[ Av = frac{1V}{0.001V} = 1000 ]Therefore, the voltage gain is 1000.
The voltage gain (Av) can be calculated using the formula:
[ Av = frac{V_{out}}{V_{in}} ]
In this case, the input voltage (Vin) is 1 mV (which is 0.001 V) and the output voltage (Vout) is 1 V.
So the voltage gain would be:
[ Av = frac{1V}{0.001V} = 1000 ]
Therefore, the voltage gain is 1000.
See lessMultiplexing provides _________
Multiplexing provides the ability to transmit multiple signals over a single communication channel, thereby optimizing the use of available bandwidth and increasing the efficiency of data transmission.
Multiplexing provides the ability to transmit multiple signals over a single communication channel, thereby optimizing the use of available bandwidth and increasing the efficiency of data transmission.
See less_____ command is used to manipulate TCP/IP routing table.
The `route` command is used to manipulate the TCP/IP routing table.
The `route` command is used to manipulate the TCP/IP routing table.
See lessThe sharing of a medium and its link by two or more devices is called _________
The sharing of a medium and its link by two or more devices is called networking.
The sharing of a medium and its link by two or more devices is called networking.
See lessWhich protocol provides the synchronization between media streams?
Real-Time Transport Protocol (RTP) provides the synchronization between media streams.
Real-Time Transport Protocol (RTP) provides the synchronization between media streams.
See less