1. | The ratio of the total floor area inclusive of all the floors to the area of the plot on which building stands is known as ___________ |
A. | groundage |
B. | plot area |
C. | floor area |
D. | built-up area |
Answer» D. built-up area |
2. | Which of the following is not a characteristic of sound? |
A. | intensity |
B. | frequency |
C. | speed |
D. | quality |
Answer» C. speed |
3. | Sound travels faster in gases than in solids. |
A. | true |
B. | false |
Answer» B. false |
4. | The velocity of sound in bricks is __________ |
A. | 1450 m/sec |
B. | 343 m/sec |
C. | 3000 m/sec |
D. | 4300 m/sec |
Answer» D. 4300 m/sec |
5. | The intensity of sound is proportional to __________ of amplitude. |
A. | square root |
B. | cube root |
C. | square |
D. | cube |
Answer» C. square |
6. | Which of the following relations between loudness and intensity is correct? |
A. | i ∝ log l |
B. | i ∝ log l2 |
C. | l ∝ log i |
D. | l ∝ log i2 |
Answer» C. l ∝ log i |
7. | Which law states that the magnitude of a sensation is directly proportional to the logarithm of the physical stimulus producing it? |
A. | beer-lambert law |
B. | huygens–fresnel law |
C. | lorentz law |
D. | weber and fechner’s law |
Answer» D. weber and fechner’s law |
8. | The intensity of sound depends on the ear of the listener. |
A. | true |
B. | false |
Answer» B. false |
9. | The amount of sound transmitted outside a room depends on the surface while the amount of sound reflected or absorbed depends on the sound insulation properties of the surface. |
A. | true |
B. | false |
Answer» B. false |
10. | Which of the following statements is correct? |
A. | pitch of the sound increases with increase in frequency |
B. | pitch of the sound decreases with increase in frequency |
C. | decibel is equal to 1/100 of bel |
D. | increase in the amplitude of the sound decreases the intensity |
Answer» A. pitch of the sound increases with increase in frequency |
11. | For an echo to be distinguished as separate, it should reach the ear _________ of a second after the direct sound. |
A. | one-fourth |
B. | one-fifth |
C. | one-eighth |
D. | one-tenth |
Answer» D. one-tenth |
12. | Reverberation time is directly proportional to ____________ |
A. | effective surface area |
B. | lateral surface area |
C. | volume of the room |
D. | shape of the room |
Answer» C. volume of the room |
13. | In the Sabine’s expression for reverberation time t=0.16V/A, A represents __________ |
A. | area of the room |
B. | volume of the room |
C. | total absorbing power |
D. | total adsorbing power |
Answer» C. total absorbing power |
14. | Reverberation time is independent of the shape of the room. |
A. | true |
B. | false |
Answer» A. true |
15. | The absorption of a surface is the product of the __________ of the surface and its absorption coefficient. |
A. | length |
B. | area |
C. | volume |
D. | width |
Answer» B. area |
16. | Calculate the transmission loss given the sound levels measured on either side of the wall is 60 dB and 40 dB. |
A. | 20 db |
B. | 100 db |
C. | 60 db |
D. | 2400 db |
Answer» C. 60 db |
17. | Hard materials used for sound insulation are good absorbers. |
A. | true |
B. | false |
Answer» B. false |
18. | n rigid homogeneous walls, the transmission loss of a one-brick wall is _________ |
A. | 10 db |
B. | 20 dbc) |
C. | 50 db |
D. | 70 db |
Answer» C. 50 db |
19. | In cavity wall construction for soundproofing, the width of the cavity should be at least _________ |
A. | 3 cm |
B. | 5 cm |
C. | 8 cm |
D. | 12 cm |
Answer» B. 5 cm |
20. | The sound insulation offered by rigid homogenous walls decreases with the increase in the thickness of the wall. |
A. | true |
B. | false |
Answer» B. false |
21. | Concrete floor floating construction provides good insulation against __________ sounds. |
A. | impact |
B. | air-borne |
C. | water-borne |
D. | structural |
Answer» A. impact |
22. | If the direction of the wind is at 90° to one of the faces, positive pressure will be produced on __________ |
A. | windward face |
B. | leeward face |
C. | two windward faces |
D. | two leeward faces |
Answer» A. windward face |
23. | Ventilation arising from the temperature difference between outside and inside takes place due to ____________ effect. |
A. | stack |
B. | stark |
C. | zeeman |
D. | spark |
Answer» A. stack |
24. | The maximum rate of air change is __________ |
A. | 30 per min |
B. | 30 per hour |
C. | 60 per min |
D. | 60 per hour |
Answer» D. 60 per hour |
25. | The general temperature difference between inside and outside of a room is not more than ____________ |
A. | 3°c |
B. | 5°c |
C. | 6°c |
D. | 8°c |
Answer» D. 8°c |
26. | . Partially ventilated single stack system is the modified form of __________ |
A. | single stack system and two-pipe system |
B. | single stack system and one pipe system |
C. | one pipe system and two-pipe system |
D. | two pipe system |
Answer» B. single stack system and one pipe system |
27. | In the two-pipe system for the drainage of buildings, the discharge from the waste pipe is disconnected from the drain by using __________ |
A. | gully trap |
B. | silt trap |
C. | floor trap |
D. | grease trap |
Answer» A. gully trap |
28. | Septic action is produced by the septic tank by __________ |
A. | fungi |
B. | virus |
C. | termites |
D. | anaerobic bacteria |
Answer» D. anaerobic bacteria |
29. | The length of the bathtubs generally varies from ___________ |
A. | 1.7-1.85 m |
B. | 2.5-3.2 m |
C. | 3.6-4.7 m |
D. | 4.8-5.2 m |
Answer» A. 1.7-1.85 m |
30. | The pedestal type European water closet is also known as ________ |
A. | commode |
B. | corundum |
C. | luminite |
D. | limonite |
Answer» A. commode |
31. | Which of the following is not a classification of traps based on their shape? |
A. | p-trap |
B. | q-trap |
C. | s-trap |
D. | w-trap |
Answer» D. w-trap |
32. | ________ consists of a group of member which form a support for a door or window. |
A. | sill |
B. | head |
C. | style |
D. | frame |
Answer» D. frame |
33. | _________ is the top most horizontal member of the shutter. |
A. | head |
B. | bottom rail |
C. | top rail |
D. | style |
Answer» C. top rail |
34. | __________ is the middle horizontal member of the shutter where the locking arrangement is provided. |
A. | lock rail |
B. | cross rail |
C. | top rail |
D. | bottom rail |
Answer» A. lock rail |
35. | he top or uppermost horizontal part of a frame is known as the _______ |
A. | panel |
B. | hold fast |
C. | horn |
D. | head |
Answer» D. head |
36. | ________ is the area of shutter enclosed between the adjacent rails. |
A. | sash |
B. | jamb |
C. | holdfast |
D. | panel |
Answer» D. panel |
37. | The entire assembly of styles, panels and rails is known as the __________ |
A. | putty |
B. | horn |
C. | sash |
D. | shutter |
Answer» D. shutter |
38. | _________ is a vertical member which is employed to subdivided a window or door opening vertically. |
A. | transom |
B. | jamb |
C. | mullion |
D. | rebate |
Answer» C. mullion |
39. | ____________ is a piece of timber which is fixed in an inclined position within a frame. |
A. | jamb |
B. | reveal |
C. | rebate |
D. | louver |
Answer» D. louver |
40. | __________ is a mixture of a linseed oil and whiting Chalk. |
A. | putty |
B. | pop |
C. | concrete |
D. | jamb |
Answer» A. putty |
41. | _________ is a strip of wood, usually moulded or Splayed, which is fixed on the sides and head of opening. |
A. | style |
B. | architrave |
C. | architect |
D. | head |
Answer» B. architrave |
42. | The most common type of door is: |
A. | double leaf door |
B. | louvred door |
C. | single leaf door |
D. | battened door |
Answer» C. single leaf door |
43. | The representative figure below shows the mechanism of a _________ door. |
A. | rotating |
B. | swing |
C. | spinning |
D. | sliding |
Answer» A. rotating |
44. | A casement window hung horizontally is called: |
A. | hopper |
B. | awning |
C. | pivot |
D. | transom |
Answer» B. awning |
45. | Light, a term used in windows, is: |
A. | area between outer parts of a window |
B. | glazed part of the window |
C. | area between inner parts of a window |
D. | opening of the window allowing light |
Answer» A. area between outer parts of a window |
46. | If a door swings towards the person opening it, it is called: |
A. | left handed |
B. | reverse |
C. | normal |
D. | right handed |
Answer» B. reverse |
47. | Which of the below material of window has life span of 50 years? |
A. | pvc |
B. | steel |
C. | upvc |
D. | aluminium |
Answer» C. upvc |
48. | _________ door swings both ways. |
A. | mead |
B. | dutch |
C. | garden |
D. | french |
Answer» A. mead |
49. | A bay window is a multi-panel window, which: |
A. | is provided at corners |
B. | runs parallel to the wall |
C. | embeds inside wall |
D. | projects outside wall |
Answer» D. projects outside wall |
50. | A roof lantern is also called: |
A. | skylight |
B. | cupola |
C. | celestory |
D. | oriel |
Answer» B. cupola |
51. | In a ventilator, top edge of shutter opens, |
A. | outside |
B. | inside |
C. | sideways |
D. | does not open |
Answer» B. inside |
52. | Which of the below doors is generally used in residential and office buildings? |
A. | flush door |
B. | rotating door |
C. | louvered door |
D. | hinged door |
Answer» A. flush door |
53. | The middle horizontal member of the shutter is called: |
A. | median rail |
B. | mid rail |
C. | sill rail |
D. | lock rail |
Answer» D. lock rail |
54. | Which type of floor is used for residential buildings? |
A. | ground timber floor |
B. | single joist timber floor |
C. | double joist timber floor |
D. | framed timber floor |
Answer» B. single joist timber floor |
55. | Floor under the flooring is called: |
A. | plinth |
B. | sunken floor |
C. | sub floor |
D. | hind floor |
Answer» C. sub floor |
56. | A ________ floor makes noise when an intruder walks on it. |
A. | glass |
B. | chirping |
C. | sound |
D. | nightingale |
Answer» D. nightingale |
57. | _________ floor is used for spans of more than 7.5m. |
A. | framed timber |
B. | stone |
C. | glass |
D. | double joist timber |
Answer» A. framed timber |
58. | Distribution of loads on the wall is not uniform in single joist timber floor. |
A. | true |
B. | false |
Answer» B. false |
59. | Which of the below is a problem with floors? |
A. | cracks |
B. | stains |
C. | vibration |
D. | projections |
Answer» C. vibration |
60. | Which of the below utility cannot be provided underneath a floor? |
A. | plumbing |
B. | sound proofing |
C. | air-conditioning |
D. | gas lines |
Answer» D. gas lines |
61. | The upper floors are floating floors. |
A. | true |
B. | false |
Answer» B. false |
62. | In suspended concrete floors, _________ beams are used. |
A. | t shaped |
B. | inverted l shaped |
C. | inverted t shaped |
D. | i shaped |
Answer» C. inverted t shaped |
63. | The flat, segmental, semicircular, horse-shoe and Stilted arches are __________ |
A. | two centred arch |
B. | three centred arch |
C. | five centred arch |
D. | one centred arch |
Answer» D. one centred arch |
64. | Identify the type of Arch given below. |
A. | semi circular arch |
B. | inverted arch |
C. | segmented arch |
D. | flat arch |
Answer» D. flat arch |
65. | Identify the type of Arch given below |
A. | horse shoe arch |
B. | pointed arch |
C. | relieving arch |
D. | stilted arch |
Answer» C. relieving arch |
66. | A _________ is a horizontal member which is placed across an opening to support the position of the structure above it. |
A. | door |
B. | window |
C. | sill |
D. | lintel |
Answer» D. lintel |
67. | At present, the lentils of _________ are widely used to span the openings for doors, windows, etc. in a structure. |
A. | timber |
B. | wood |
C. | rcc |
D. | cement |
Answer» C. rcc |
68. | _________ lintels consist of pieces of timber which are placed across the opening. |
A. | timber |
B. | rcc |
C. | steel |
D. | brick |
Answer» A. timber |
69. | In Wood or Timber lintels, the depth of lintel should be about __________ to __________ of the span with the minimum value of 80 mm. |
A. | 1/6,1/4 |
B. | 1/12,1/4 |
C. | 1/12,1/8 |
D. | 1/6,1/8 |
Answer» C. 1/12,1/8 |
70. | ___________ consist of slabs of Stones which are placed across the opening. |
A. | stone lintels |
B. | brick lintels |
C. | steel lintels |
D. | wood lintels |
Answer» A. stone lintels |
71. | ___________ consist of bricks which are generally placed on one end or edge. |
A. | stone lintels |
B. | brick lintels |
C. | wood lintels |
D. | timber lintels |
Answer» B. brick lintels |
72. | ______________ consists of Steel angles or rolled Steel joists. |
A. | rcc lintels |
B. | steel lintels |
C. | wood lintels |
D. | timber lintels |
Answer» B. steel lintels |
73. | ____________ consists of the reinforcement cement concrete and they have replaced practically all other materials for the lintels. |
A. | rcc lintels |
B. | wood lintels |
C. | stone lintels |
D. | timber lintels |
Answer» A. rcc lintels |
74. | ___________ arrangement helps in improving the appearance of the face and also reduces the quality of concrete. |
A. | rebated boot lintel |
B. | d.p.c. |
C. | rcc |
D. | reboot lintel |
Answer» A. rebated boot lintel |
Tags
Question and answers in Building Technology and Architectural Planning,Building Technology and Architectural Planning multiple choice questions and answers,Building Technology and Architectural Planning Important MCQs,Solved MCQs for Building Technology and Architectural Planning,Building Technology and Architectural Planning MCQs with answers PDF download